Foundation Repair in Burlington, KY

This homeowner in Burlington, KY, had a leaky crack in their foundation and some sagging floor boards above their basement. As it turns out, the crack appeared due to hydrostatic pressure pressing the wall inwards and the floorboards sank due to a failing main beam. We first sealed the leaky crack by using our FlexiSpan system. This required us to chip and clean out the crack, dig a trench at the base of the crack, apply a layer of epoxy to the crack, run a foam strip over the first layer of epoxy down into the trench, apply a final layer of epoxy, fill the trench with gravel, cover the top of the trench with a fresh concrete layer, and apply a BrightWall panel over the entire system. To stabilize the lateral movement of the wall we braced the wall with our PowerBrace beams. To stabilize the floor boards, we installed a SmartJack post underneath the sagging part of the main beam right near the crack repair.