Basement Crack Repair & Waterproofing in Highland County, OH

A homeowner was concerned about moisture in a crawl space.  We installed a CleanSpace Encapsulation System, CleanSpace Vent Covers and, a SaniDry Sedona to seal out the moisture from the crawl space.  

We examine a foundation in Hillsboro, Ohio that was sloping and cracking over time. We determined that the best solution for the foundation issues would be to install a series of helical piers. We installed 8 Helical Piers under the perimeter of the foundation in order to permanently stabilize it and prevent further settling. 

The owners of a property we worked on in Lynchburg, Ohio became concerned when they noticed that their kitchen floor was pulling away from the wall. After examining under some of the displaced tiles, they noticed that the concrete was cracking as well. They called us to see what could be done to resolve the issue. 

Our inspector determined that the issue was caused by their indoor flooring sinking into uncompact soils over time - creating an uneven surface. Our technicians installed PolyLevel beneath the slabs. PolyLevel is a high-strength foam that expands as it dries - lifting slabs back to level. This solution secured the kitchen floor and was installed and dry within an hour. 

This home in Leesburg, Ohio had recurring issues with their basement walls bowing and tilting. The homeowners had previously had a contractor install carbon fiber straps, which were not properly placed and had become compromised over time. They knew that it was time to call the experts. 

Our team installed 8 PowerBraces along the bowing basement walls, permanently stabilizing them. This solution can also be tightened over time - potentially reversing wall failure. This makes it a great long-term solution that left the homeowners with peace of mind and stabilized walls. 

A homeowner in Hillsboro, Ohio (Highland County) contacted us with concerns about moisture in the crawl space of their prefabricated home. Prefab homes often sit over crawl spaces that are especially vulnerable to dampness, and in this case, standing water and musty odors were beginning to affect the air quality inside. The homeowners wanted a permanent solution to protect both their living space and the home’s structure.

Our team designed a complete waterproofing and encapsulation system. We installed perforated drain pipe around the perimeter to capture and direct water to a SmartSump pump system. Across the crawl space floor, we laid drainage matting to keep water moving freely beneath the liner. From there, we encapsulated the entire area with CleanSpace, creating a sealed barrier against moisture. To finish the job, we added a high-performance dehumidification system to keep the environment dry and stable year-round.

The result is a clean, healthy, and energy-efficient crawl space that gives the homeowners peace of mind knowing their prefabricated home is now protected from future moisture issues.